YS100 high speed universal module SMT machine

• High-speed mounting capacity handling 25,000CPH(0.14sec/CHIP Equivalent : optimum condition)
• +/-50μm(CHIP), +/-30μm(QFP)mounting absolute accuracy in full time operation
• Handles a wide range of components from 0402 chips to W45xL100mm or less components and with long connectors
• Capable of handling 15mm height components
• Applicable to large size PCB(L510mm x W460mm)
• Built-in tape cutter available as an option
• Conformity with both Machinery directive and EMC directive (CE marking)

Model	YS100(Model : KJJ-000)
Applicable PCB	L510 x W460mm to L50 x W50mm (Note 1)(Note 2)
Through-put (Optimum)	25,000CPH（0.14sec/CHIP Equivalent）
Mounting accuracy (Yamaha's standard components)	Absolute accuracy(μ+3σ):+/-0.05mm/CHIP, +/-0.05mm/QFP Repeatability(3σ):+/-0.03mm/CHIP, +/-0.03mm/QFP
Applicable components	0402(Metric base to □45mm components, SOP/SOJ, QFP,connector, PLCC, CSP/BGA, Long connector(W45xL100mm or less) (Note 3)(Note 4) Height of components which can be mounted : 15mm or less(Note 5)
Number of component types	96 types(Max, 8mm tape reel conversion)(Note 1)
Power supply	3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source	0.45MPa or more, in clean, dry states
External dimension (Note 6)	L1,665xW1,562(End of cover)xH1,445mm(cover top) L1,665xW1,615(End of guide for feeder carriage)xH1,445m(cover top)
Weight	Approx. 1,630kg(Main unit only)

(Note 1)It is varied by the combination layout together with sATS / dYTF etc.
(Note 2)For information on "2 stages push-up spec.", please consult us separately.
(Note 3)In case of FNC head type, the applicable components range is □31mm or less Components.
(Note 4)When handling long connectors and large sized components, about the eccentric offset values and the rotation angle, please consult us separately.
(Note 5)4mm or less height of upper face of PCB before transport is required for the FNC head type.
(Note 6)This dimension does not include the projection.